Water purification flocculant

First, product introduction

The appearance of this product (JL-T02) is colorless liquid, density pH: 3~5. It is mainly used for degradation of high CODcr wastewater with low dosage and good removal effect. Especially for chemical industry, mine wastewater. This product can be added in the initial sinking process, without additional processing processes.

2. Use method

1. First, adjust the pH value of the wastewater to 9 ~ 11;

2, according to the proportion of about 0.5‰ to 1‰, the product is added to the wastewater, after full mixing and flocculation (about 5 minutes), add polyacrylamide (PAM) solution to assist precipitation separation;

3, settling for 15 to 30 minutes, mud and water separation, supernatant can be discharged into the next processing process.

Iii. Instructions

1, this product has no obvious timeliness, can be stored for a long time;

2, this product is non-flammable and explosive products, can be managed according to general chemical products.